NJM358C Series

Low Power Dual Operational Amplifier

Download Datasheet

Description

The NJM358C / NJM358CA consist of two independent, high-gain, internally frequency-compensated op-amps, specifically designed to operate from a single power supply over a wide range of voltages. The low-power supply drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, DC gain blocks and all the conventional op-amp circuits, which can now be more easily implemented in single power supply systems. For example, these circuits can be directly supplied with the standard +5V, which is used in logic systems and will easily provide the required interface electronics with no additional power supply. In linear mode, the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from only a single power supply voltage.

Spec

	Consumer
No.of Circuit	2 ch.
Power Supply	Single
Supply Voltage	3 V to 30 V
Supply Current (Per ch.)	Typ. 0.35 mA to max. 0.6 mA
Input Offset Voltage	Typ. 0.5 mV to max. 7 mV
Slew Rate	Typ. 0.6 V/μsec
Input Bias Current	Typ. 20 nA to max. 150 nA
Input Offset Current	Typ. 2 nA to max. 30 nA
GBW	Typ. 1.1 MHz
Noise Voltage (en)	Typ. 30 nV/√Hz
Input Offset Drift	Typ. 7 μV/℃
Wide Operating Temperature	-40°C to 85°C
Junction Temp.	150°C
Min Stable Gain	1 V/V
Package	SOP8 SSOP8
Note(1)	Internally frequency-compensated
Note(2)	Internal ESD protection (Human body model (HBM) ±2000V typ.)

Download Datasheet

Quality &
Packages

Product Name	Compatibility	Package	Marking	Reliability
NJM358CG		SOP8	-	NJM-1-s-fr
NJM358CV		SSOP8	-	NJM-1-s-fr

Refer to the datasheets for the details on the product.
The package file or the datasheet includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and recommended land pattern.