R1200 Series
PWM Step-up DC/DC Converter for PMOLED and General Use with Shutdown Function

Download Datasheet

  • Description

    The R1200 Series are CMOS-based PWM step-up DC/DC converters, which are optimized to drive PMOLED or white LEDs with constant current. The R1200 includes an under-voltage lockout circuit (UVLO), a soft-start circuit, and an over-voltage protection circuit (OVP). By simply using an inductor, divider resistors, and capacitors as external components, PMOLEDs and white LEDs can be driven with high efficiency.

    At the standby mode, the internal NPN transistor can separate the output from the input. (Shutdown function) By this shutdown function, the LED current can be completely shutdown, and output voltage for PMOLED can be completely cut off, therefore, the R1200 does not have bad impact on the life expectancy of PMOLED. The version with auto-discharge function is available.

  • Spec
    Consumer
    Input Voltage Range 2.3 V to 5.5 V (6.5 V)
    Operating Temperature Range -40°C to 85°C (125°C)
    Supply Current Typ. 500 µA
    Standby Current Typ. 0 µA
    Output Voltage Range Max. 20 V (0.1 V step)
    Feedback Voltage 1.0 V (Externally adjustable)
    Feedback Voltage Accuracy ±1.5%
    Feedback Voltage Temperature Coefficient ±150 ppm/°C
    Driver ON-resistance Typ. 1.35 Ω
    Oscillator Frequency Typ. 1200 kHz
    Maximum Duty Cycle Typ. 91%
    Package DFN1616-6, SOT-23-6

    Protections / Functions

    TSD ILX OCP OVP UVLO OVLO Reverse Shutdown Soft Start SSCG PGOOD Auto Discharge Anti-ringing Sequencing Max Duty Ext. Phase LED Adjust
  • Technical
    Documents
    • Typical Application

      Typical Application

      * R1, R2 : For setting output voltage, R3 : 2kΩ, C3 : 220pF
      By simply using an inductor, divider resistors and capacitors as external components, a high-efficiency step-up DC/DC converter can be easily configured.

    • R1200 Efficiency vs. Output Current

      R1200 Efficiency vs. Output Current

    • Related Links

      • Prime Designer

        Online Design Tool

        Registration to myNISD is required to use some of the functions, such as simulations.

        • [V]
        • [V]
        • [V]
        • [A]
  • Quality &
    Packages
    • Refer to the datasheets for the details on the product.
    • The package file or the datasheet includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and recommended land pattern.

Download Datasheet

Functional Description

TSD Thermal Shutdown Function
ILX LX Current Limit Function
OCP Overcurrent Protection
OVP Overvoltage Protection
UVLO Undervoltage Lockout Protection
OVLO Overvoltage Lockout Protection
Reverse Reverse Current Protection Circuit
Shutdown Shutdown Function
Soft Start Soft Start Function
SSCG Spread Spectrum Clock Generator Function
PGOOD Power Good Output
Auto Discharge Auto Discharge Function
Anti-ringing Anti-ringing Switch Function
Sequencing Start-up Sequencing Control
Max Duty Maximum Duty Cycle
Ext. Phase Externally Adjustable Phase Compensation
LED Adjust LED High-speed Dimming Control

Search for similar products under conditions below.

Category:DC/DC Switching Regulators

Topology Boost
VIN
min (V)
2.3
VIN
max (V)
5.5
VOUT
max (V)
20
ISS
(µA)
500