NJU7048 Series
9V/µs High-Speed, Rail-to-Rail I/O CMOS Operational Amplifier

Download Datasheet

  • Description

    The NJU7046/NJU7047/NJU7048 are rail to rail input and output single supply operational amplifier featuring high speed and low input bias current. 9V/us slew rate, 5MHz gain bandwidth, 1pA input bias current and -40 to 125°C operating temperature range, make these amplifiers useful in wide variety of applications such as filters, integrators, current sensing, photodiode amplifiers and industrial applications. The rail-to-rail input and output enables designers to buffers of input and output for ADC, DAC, ASIC and other wide output swing devices. The NJU7046/NJU7047/NJU7048 operates in single supply 2.7V to 5.5V, and input common-mode voltage range includes the supply rails. Output voltage typically swings to within 70mV of the supply rails with 600Ω load, and 110mA short-circuit current drive capability. The NJU7046/NJU7047/NJU7048 are high RF-immunity to reduce malfunctions caused by RF noises from mobile phones and others. The NJU7046 is available in 5-pin SC-88A and SOT-23 package. NJU7047 is available in 8-pin SOP:JEDEC 150 mil, MSOP(TVSP): meet JEDEC MO-187-DA / thin and DFN that is thin and 2mm square small package. NJU7048 is available in 14-pin SOP and SSOP package.

    Applications

    • High speed sensor Amplifiers
    • Current sensor amplifiers
    • Photodiode amplifiers
    • ADC front ends
    • Battery-powered instruments

  • Spec
    Consumer
    No.of Circuit 4 ch.
    Power Supply Single
    Supply Voltage 2.7 V to 5.5 V
    Supply Current (Per ch.) Typ. 1.325 mA to max. 2.1 mA
    Input Offset Voltage Typ. 0.9 mV to max. 5 mV
    Slew Rate Typ. 9 V/μsec
    Input Bias Current Typ. 0.001 nA to max.- nA
    Input Offset Current Typ. 0.001 nA to max.- nA
    GBW Typ. 5 MHz
    Noise Voltage (en) Typ. 20 nV/√Hz
    Input Offset Drift Typ. 2 μV/℃
    Wide Operating Temperature -40°C to 125°C
    Junction Temp. 150°C
    Min Stable Gain 1 V/V
    Package SOP14
    SSOP14
    Note(1) Low Input Offset Voltage Drift (2µV/°C typ.)
    Note(2) Short Circuit Output Current (110mA)
  • Technical
    Documents
  • Quality &
    Packages
    • Refer to the datasheets for the details on the product.
    • The package file or the datasheet includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and recommended land pattern.

Download Datasheet

Functional Description

Search for similar products under conditions below.

Category:Operational Amplifiers

No.of Circuit 4
Power Supply Single
Supply Voltage
(+8V=8,
±8V=16)
min(V)
2.7
Supply Voltage
(+8V=8,
±8V=16)
max(V)
5.5
Supply Current
(Per ch.)
typ(mA)
1.325
Input
Offset
Voltage
max(mV)
5
Slew
Rate
typ(V/µsec)
9
GBW
typ(MHz)
5
en(nV/√Hz) 20