NJM358CA Series
Low Power Dual Operational Amplifier

Download Datasheet
ECAD Model: Learn more
  • Standard
  • RoHS
Package1
Package2
Package1
Package2

Description

The NJM358C / NJM358CA consist of two independent, high-gain, internally frequency-compensated op-amps, specifically designed to operate from a single power supply over a wide range of voltages. The low-power supply drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, DC gain blocks and all the conventional op-amp circuits, which can now be more easily implemented in single power supply systems. For example, these circuits can be directly supplied with the standard +5V, which is used in logic systems and will easily provide the required interface electronics with no additional power supply. In linear mode, the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from only a single power supply voltage.

Spec

Standard
No.of Circuit 2 ch.
Power Supply Single
Supply Voltage 3 V to 30 V
Supply Current (Per ch.) Typ. 0.35 mA to max. 0.6 mA
Input Offset Voltage Typ. 0.5 mV to max. 2 mV
Slew Rate Typ. 0.6 V/μsec
Input Bias Current Typ. 20 nA to max. 150 nA
Input Offset Current Typ. 2 nA to max. 30 nA
GBW Typ. 1.1 MHz
Noise Voltage (en) Typ. 30 nV/√Hz
Input Offset Drift Typ. 7 μV/℃
Wide Operating Temperature -40°C to 85°C
Junction Temp. 150°C
Min Stable Gain 1 V/V
Package SOP8
SSOP8
Note(1) Internally frequency-compensated
Note(2) Internal ESD protection (Human body model (HBM) ±2000V typ.)

Download Datasheet

Search for similar products under conditions below.

Category:Operational Amplifiers

No.of Circuit 2
Power Supply Single
Supply Voltage (+8V=8, ±8V=16) min(V) 3
Supply Voltage (+8V=8, ±8V=16) max(V) 30
Supply Current
(Per ch.) typ(mA)
0.35
Input Offset Voltage max(mV) 2
Slew Rate typ(V/µsec) 0.6
GBW typ(MHz) 1.1
en(nV/√Hz) 30

Technical Documents

Quality & Packages

  • Refer to the datasheets for the details on the product.
  • The package file or the datasheet includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and recommended land pattern.

FAQ

Buy / Contact

  • Purchase, Request for samples and documents
    Sales are made through distributors. Please contact your local distributors for any sales-related inquiry such as price.
  • Available from 1 piece!
    Our electronic device products are available through our authorized online distributors.
  • Technical Support