NJM2902C Series

Single-Supply Quad Operational Amplifier

Download Datasheet

Description

The NJM2902C / NJM2902CA consists of four independent, high gain, internally frequency compensated operation amplifiers, which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, DC gain blocks, and all the conventional op amp circuits, which now can be more easily implemented in single power supply systems. For example, the NJM2902C / NJM2902CA can be directly operated off of the standard +5V power supply voltage, which is used in digital systems and will easily provide the required interface electronics without requiring the additional ±15V power supplies.

Spec

	Consumer
No.of Circuit	4 ch.
Power Supply	Single
Supply Voltage	3 V to 32 V
Supply Current (Per ch.)	Typ. 0.3 mA to max. 0.5 mA
Input Offset Voltage	Typ. 0.5 mV to max. 7 mV
Slew Rate	Typ. 0.6 V/μsec
Input Bias Current	Typ. 20 nA to max. 150 nA
Input Offset Current	Typ. 2 nA to max. 30 nA
GBW	Typ. 1.3 MHz
Noise Voltage (en)	Typ. 30 nV/√Hz
Wide Operating Temperature	-40°C to 125°C
Junction Temp.	150°C
Min Stable Gain	1 V/V
Package	SOP14 SSOP14
Note(1)	Internal ESD protection Human body model(HBM) (±2000V typ.)

Download Datasheet

Quality &
Packages

Product Name	Compatibility	Package	Marking	Reliability
NJM2902CG		SOP14	NJM2902CG	NJM-1-s-fr
NJM2902CV		SSOP14	NJM2902CV	NJM-1-s-fr

Refer to the datasheets for the details on the product.
The package file or the datasheet includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and recommended land pattern.