Dual H-Bridge Driver with Boost Converter

Data Sheet


  • Boost Converter (
    Block Output Switch Voltage (40V max.)
    Switching Current (1.5A min.)
    PWM Control
    Operating Voltage Range (2.7 to 5.5V)
    Oscillation Frequency Range (380k to 1MHz)
    Soft Start Function (48ms typ.)
    Over Current Protection
    Over Voltage Protection)
  • H-Bridge Driver Block (
    Internal 2 Channel H-Bridge
    Each Channel Operates Individually
    Over Current Protection (±300mA typ.)
    Operating Voltage Range (7.0 to 35V)
    Switching Frequency (300kHz max.)
    Output Shut Down Control
    Fault Indicator Output)
  • Under Voltage Lockout
  • Built-in Thermal Shutdown
  • Standby Function
  • Package Outline (NJW4814MLE : EQFN24-LE)

General Description

The NJW4814 is a dual H-bridge driver with boost converter IC. It can boost the output voltage from Li-ion battery and/or a 5V power supply and drives a piezo device by two H- bridge drivers. 48ms of internal fixed soft start function of the boost circuit sets a limit to startup current. The dual H-bridge drivers have independent signal inputs and a fault output function, therefore the NJW4814 improves controllability from a microcomputer.The input frequency of H-bridge driver is up to 300kHz.

Package Information

Part Number Package Outline PLP Pins Terminal Finish Weight(mg) (Reference) Reflow soldering Flow soldering Iron soldering Packing Condition MSL Solder Foot Print
NJW4814MLE EQFN24-LE - 20 Sn2Bi 31 Yes - - Non dry pack 1

Sample & Buy

Part Number Packages Status Packing Specification Sample Buy
NJW4814MLE EQFN24-LE (Active) Contact Us Stock Check