• X(Twitter)
  • Youtube
  • Linkedin
  • Newsletter

NJU7098AF1-C Series
0.05µV/°C max, Zero-Drift, Single Supply, Rail-to-Rail Output CMOS Operational Amplifier

Download Datasheet

  • Description

    The NJU7098AF1-C is a low offset voltage and zero-drift operational amplifier. With an maximum input offset voltage of 15µV and offset drift of 0.05µV/°C, the NJU7098AF1-C is suitable for applications in which error sources cannot be tolerated. The NJU7098AF1-C operate from 3V to 10V with single supply. Rail-to-rail output swing , input common mode voltage within negative rail and 30mA high output current capability provided by the NJU7098AF1-C make low-side sensing or precision output buffer easy. The almost zero DC offset and offset drift are supported with a power supply rejection ratio and common mode rejection ratio at 130dB. Futuremore, typical open-loop voltage gain is 140dB. The NJU7098AF1-C includes a shutdown mode. Under logic control, the amplifiers can be switched from normal operation to shutdown current that is 15µA max and the output placed in a high- impedance state.

    Applications


    • Thermocouple Amplifiers
    • Electronic Scales
    • Strain Gauge Amplifiers
    • Medical Instrumentation
    • Precision Current Sensing
    • High Resolution Data Acquisition
    • Low-Side Current Sensing
    • Handheld Test Equipment

  • Spec
    Consumer
    No.of Circuit 1 ch.
    Power Supply Single
    Supply Voltage 3 V to 10 V
    Supply Current (Per ch.) Typ. 0.6 mA to max. 1.2 mA
    Input Offset Voltage Typ. 0.003 mV to max. 0.015 mV
    Slew Rate Typ. 3 V/μsec
    Input Bias Current Typ. 0.02 nA to max. 0.4 nA
    Input Offset Current Typ. - nA to max. 0.5 nA
    GBW Typ. 3 MHz
    Noise Voltage (en) Typ. 120 nV/√Hz
    Wide Operating Temperature -40°C to 105°C
    Junction Temp. 125°C
    Min Stable Gain 1 V/V
    Package SOT-23-6-1
    Note(1) Rail-to-Rail Output (RL=10kΩ) (20mV from rail)
    Note(2) Zero-Drift (0.05µV/°C max.)
  • Technical
    Documents
  • Quality &
    Packages
    • Refer to the datasheets for the details on the product.
    • The package file or the datasheet includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and recommended land pattern.

Download Datasheet

Functional Description

Search for similar products under conditions below.

Category:Operational Amplifiers

No.of Circuit 1
Power Supply Single
Supply Voltage
(+8V=8,
±8V=16)
min(V)
3
Supply Voltage
(+8V=8,
±8V=16)
max(V)
10
Supply Current
(Per ch.)
typ(mA)
0.6
Input
Offset
Voltage
max(mV)
0.015
Slew
Rate
typ(V/µsec)
3
GBW
typ(MHz)
3
en(nV/√Hz) 120