NJU7098A Series
0.05µV/°C max, Zero-Drift, Single Supply Rail-to-Rail Output CMOS Operational Amplifier

Download Datasheet
ECAD Model: Learn more
  • Standard
  • Product Longevity Program
  • RoHS
Package1
Package1

Description

The NJU7098A is a low offset voltage and zero-drift operational amplifier. With an maximum input offset voltage of 15µV and offset drift of 0.05µV/°C, The NJU7098A is suitable for applications in which error sources cannot be tolerated. The NJU7098A operate from 3V to 10V with single supply. Rail-to-rail output swing , input common mode voltage within negative rail and 30mA high output current capability provided by the NJU7098A make low-side sensing or precision output buffer easy. The almost zero DC offset and offset drift are supported with a power supply rejection ratio andcommon mode rejection ratio at 130dB. Futuremore, typical open-loop voltage gain is 140dB. The NJU7098 includes a shutdown mode. Under logic control, the amplifiers can be switched from normal operation to shutdown current that is 15µA max and the output placed in a high- impedance state. The NJU7098A is available in 6-pin SOT-23 package.

Applications

  • Thermocouple Amplifiers
  • Electronic Scales
  • Strain Gauge Amplifiers
  • Medical Instrumentation
  • Precision Current Sensing
  • High Resolution Data Acquisition
  • Low-Side Current Sensing
  • Handheld Test Equipment

Spec

Standard
No.of Circuit 1 ch.
Power Supply Single
Supply Voltage 3 V to 10 V
Supply Current (Per ch.) Typ. 0.6 mA to max. 1.2 mA
Input Offset Voltage Typ. 0.003 mV to max. 0.015 mV
Slew Rate Typ. 3 V/μsec
Input Bias Current Typ. 0.02 nA to max. 0.4 nA
Input Offset Current Typ. - nA to max. 0.5 nA
GBW Typ. 3 MHz
Noise Voltage (en) Typ. 120 nV/√Hz
Wide Operating Temperature -40°C to 105°C
Junction Temp. 125°C
Min Stable Gain 1 V/V
Package SOT-23-6-1
Note(1) Rail-to-Rail Output (RL=10kΩ) (20mV from rail)
Note(2) Zero-Drift (0.05µV/°C max.)

Download Datasheet

Search for similar products under conditions below.

Category:Operational Amplifiers

No.of Circuit 1
Power Supply Single
Supply Voltage (+8V=8, ±8V=16) min(V) 3
Supply Voltage (+8V=8, ±8V=16) max(V) 10
Supply Current
(Per ch.) typ(mA)
0.6
Input Offset Voltage max(mV) 0.015
Slew Rate typ(V/µsec) 3
GBW typ(MHz) 3
en(nV/√Hz) 120

Technical Documents

Quality & Packages

  • Refer to the datasheets for the details on the product.
  • The package file or the datasheet includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and recommended land pattern.

FAQ

Buy / Contact

  • Purchase, Request for samples and documents
    Sales are made through distributors. Please contact your local distributors for any sales-related inquiry such as price.
  • Available from 1 piece!
    Our electronic device products are available through our authorized online distributors.
  • Technical Support