NJM8530 Series
14V, Low Noise, Low Power, Rail-to-Rail Input/Output, Operational Amplifier

Download Datasheet

  • Description

    The NJM8530/NJM8532/NJM8534 are single/dual/quad rail to rail input and output single supply operational amplifier featuring 14V supply voltage, low noise and low power. A wide supply voltage range from 1.8V to 14V with a rail to rail input and output allows the device to be used in wide variety of applications, such as audio amplifier, hi-side current sensing, buffering and others. Furthermore, low supply current of 580µA typical at NJM8532 combined with a wide bandwidth of 1MHz and low very low noise of 10nV/√Hz at 1kHz make NJM8530/NJM8532/NJM8534 very suitable for a variety of battery-powered applications that require a good balance between low power, low noise and wide bandwidth. NJM8530/NJM8532/NJM8534 can drive up to approximately 1000pF, and is unity-gain stable. Operating temperature range is -40°C to 125°C. The NJM8530(single) is available in 5-pin SOT-23 package. NJM8532(dual) is available in 8-pin DMP, SSOP and MSOP(TVSP): meet JEDEC MO-187-DA / thin type package. NJM8534(quad) is available in 14-pin SSOP package.

    Applications

    • Battery-powered instruments, Audio, Sensor applications, Medical, Security
    • High-side/Low-side Current sensing amplifiers
    • Active Filters
    • Analog-to-digital / Digital-to-analog Buffers
    • Handheld Test Equipment

  • Spec
    Consumer Automotive
    No.of Circuit 1 ch.
    Power Supply Single
    Supply Voltage 1.8 V to 14 V
    Supply Current (Per ch.) Typ. 0.32 mA to max. 0.55 mA Typ. - mA to max. 0.55 mA
    Input Offset Voltage Typ. 1 mV to max. 4 mV Typ. - mV to max. 5 mV
    Slew Rate Typ. 0.4 V/μsec
    Input Bias Current Typ. 50 nA to max. 250 nA Typ. - nA to max. 275 nA
    Input Offset Current Typ. 5 nA to max. 100 nA Typ. - nA to max. 100 nA
    GBW Typ. 1 MHz
    Noise Voltage (en) Typ. 10 nV/√Hz
    Input Offset Drift Typ. 1.5 μV/℃
    Wide Operating Temperature -40°C to 125°C
    Junction Temp. 150°C
    Min Stable Gain 1 V/V
    Package SOT-23-5
    Note(1) Capacitive Load Drive (1000pF) If you need datasheets of this
    product, please contact us.
  • Technical
    Documents
  • Quality &
    Packages
    • Refer to the datasheets for the details on the product.
    • The package file or the datasheet includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and recommended land pattern.

Download Datasheet

Functional Description

Search for similar products under conditions below.

Category:Operational Amplifiers

No.of Circuit 1
Power Supply Single
Supply Voltage
(+8V=8,
±8V=16)
min(V)
1.8
Supply Voltage
(+8V=8,
±8V=16)
max(V)
14
Supply Current
(Per ch.)
typ(mA)
0.32
Input
Offset
Voltage
max(mV)
4
Slew
Rate
typ(V/µsec)
0.4
GBW
typ(MHz)
1
en(nV/√Hz) 10