NJM8202 Series
Single Supply, Rail-to-Rail Output Dual Operational Amplifier

Download Datasheet

  • Description

    The NJM8202 is a Rail-to-Rail output single supply dual operational amplifier with a low noise of 10nV/√Hz (typ. at 1kHz) and high RF noise immunity.The high RF noise immunity can reduce malfunctions caused by RF noises from mobile phones and others.It offers a single supply voltage operation from +2.5V to +14V,rail-to-rail output swing close to both rails and input voltage range from ground. It is suitable for various applications such as current sense amplifiers, sound processing, buffer amplifiers, filter circuits and others. The NJM8202 is available in small surface mounting packages of SOP8 (DMP8), SSOP8, SOP8 JEDEC 150mil, MSOP8 (VSP8) and MSOP8 (TVSP8).

    Applications


    • Note PC, PDA
    • Mobile phone
    • Audio signal processing
    • Current detect
    • Buffer, Active filter

  • Spec
    Consumer Automotive
    No.of Circuit 2 ch.
    Power Supply Single
    Supply Voltage 2.5 V to 14 V
    Supply Current (Per ch.) Typ. 2 mA to max. 2.5 mA Typ. - mA to max. 2.75 mA
    Input Offset Voltage Typ. 1 mV to max. 6 mV Typ. - mV to max. 12 mV
    Slew Rate Typ. 3.5 V/μsec
    Input Bias Current Typ. 100 nA to max. 350 nA Typ. - nA to max. 430 nA
    Input Offset Current Typ. 5 nA to max. 100 nA Typ. - nA to max. 110 nA
    GBW Typ. 10 MHz
    Noise Voltage (en) Typ. 10 nV/√Hz
    Wide Operating Temperature -40°C to 85°C -40°C to 125°C
    Junction Temp. 150°C
    Min Stable Gain 1 V/V
    Package DMP8
    SOP8 JEDEC 150mil(EMP8)
    SSOP8
    MSOP8(TVSP8)
    MSOP8(VSP8)
    DMP8
    Note(1) RF Immunity (Enhance the RF immunity from mobile phones) If you need datasheets of this
    product, please contact us.
  • Technical
    Documents
  • Quality &
    Packages
    • Refer to the datasheets for the details on the product.
    • The package file or the datasheet includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and recommended land pattern.

Download Datasheet

Functional Description

Search for similar products under conditions below.

Category:Operational Amplifiers

No.of Circuit 2
Power Supply Single
Supply Voltage
(+8V=8,
±8V=16)
min(V)
2.5
Supply Voltage
(+8V=8,
±8V=16)
max(V)
14
Supply Current
(Per ch.)
typ(mA)
2
Input
Offset
Voltage
max(mV)
6
Slew
Rate
typ(V/µsec)
3.5
GBW
typ(MHz)
10
en(nV/√Hz) 10