NJM2902 Series

Quad Single-Supply Operational Amplifier

Download Datasheet

Description

The NJM2902 consists of four independent high-gain operational amplifiers that are designed for single-supply operation. Operation from split power supplies is also possible and the low power supply drain is independent of the magnitude of the power supply voltage. Used with a dual supply the circuit will operate over a wide range of supply voltages. However, a large amount of crossover distortion may occur with loads to ground. An external current-sinking resistor to-V_s will reduce crossover distortion. There is no crossover distortion problem in single-supply operation if the load is direct-coupled to ground.

Spec

	Consumer	Automotive
No.of Circuit	4 ch.
Power Supply	Single
Supply Voltage	3 V to 32 V	3 V to 40 V
Supply Current (Per ch.)	Typ. 0.25 mA to max. 0.5 mA	Typ. - mA to max. 1 mA
Input Offset Voltage	Typ. 2 mV to max. 10 mV	Typ. - mV to max. 20 mV
Slew Rate	Typ. 0.5 V/μsec
Input Bias Current	Typ. 20 nA to max. 500 nA	Typ. - nA to max. 550 nA
Input Offset Current	Typ. 5 nA to max. 50 nA	Typ. - nA to max. 50 nA
GBW	Typ. 0.5 MHz
Noise Voltage (en)	Typ. 27 nV/√Hz
Wide Operating Temperature	-40°C to 85°C	-40°C to 125°C
Junction Temp.	125°C	150°C
Min Stable Gain	1 V/V
Package	DMP14 SSOP14	SSOP14
Note(1)	High Output Voltage (V⁺-2V)	If you need datasheets of this product, please contact us.

Download Datasheet

Quality &
Packages

Product Name	Package	Marking	Reliability
NJM2902M	DMP14	NJM2902M	NJM-1-s-fr
NJM2902V	SSOP14	NJM2902V	NJM-1-s-fr
NJM2902V-T1	SSOP14	NJM2902V-T1	NJM-1-s-fr

Refer to the datasheets for the details on the product.
The package file or the datasheet includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and recommended land pattern.