NJW4382

Dual DMOS Full Bridge Stepper Motor Driver

Data Sheet

Features

  • Supply Voltage (VMM=8 to 36V)
  • Output Current (
    Io=900mA (DC)
    Io=1500mA (Peak)
  • Low ON Resistance Output (RO(H+L)=1.0Ω typ. (High side + Low side))
  • Input Control Method (Phase & I0/I1)
  • Constant Current Control Circuit (
    Two Bit Current Level Selection (100%, 71%, 38%, 0%)
    Auto Current Decay Function (ACD))
  • External VR Input
  • Low Quiescent Current
  • Standby Function
  • Protection Circuit (OCP, UVLO, TSD)
  • Alarm Output Function for OCP or TSD circuit
  • BCD Technology
  • Package (HTSSOP24-P1)

General Description

The NJW4382 is a high efficiency bipolar drive stepper motor driver IC, which controls steps and direction by "Phase & I0/I1"input. Stepping resolution is available with "Full", "Half", "Modified half" and "Quarter" by using combination of I0 and I1. It has characteristics such as low quiescent current, high output current, 40V tolerance and low ON resistance output. Internal protection circuits are Under Voltage Lockout (UVLO), Thermal Shutdown (TSD) and Over Current Protection (OCP). Therefore, the NJW4382 is suitable for various stepper motors.

Package Information

Part Number Package Outline PLP Pins Terminal Finish Weight(mg) (Reference) Reflow soldering Flow soldering Iron soldering Packing Condition MSL Solder Foot Print
NJW4382VP1 HTSSOP24-P1 24 Ni/Pd/Au 83 Yes - - Dry pack 1 2a

Sample & Buy

Part Number Packages Status Packing Specification Sample Buy
NJW4382VP1 HTSSOP24-P1 (Active) Contact Us Stock Check