New Product
December 17, 2020

NJR to launch a new GNSS LNA NJG1187 with industry-leading*1 high gain and low NF that is suitable to high-precision positioning

 Nisshinbo Micro Device (NJR) has developed a high gain dual stage LNA " NJG1187 " for GNSS, and entered mass production.

General Description

 NJG1187 is an industry-leading high gain and low NF (Noise Figure) Low Noise Amplifier (LNA) designed for GNSS applications.
 In recent years, Multi-GNSS support that receives signals from 1.1 to 1.2 GHz band (1164-1300 MHz) and in addition to the conventional 1.5 GHz band (1559 to 1610 MHz) is required for high-precision positioning in self-driving cars and so on.
 The NJG1187KG1 is available to tune for the corresponding frequency by changing only value of external parts and realize high gain, low NF in each band of 1.1 to 1.5GHz.
 This LNA is also available to place a filter between the two LNA stages in order to realize high attenuation without degradation of NF for receiver sensitivity.
It can be used for various applications such as car antennas and GNSS modules.

※1 NJR researched by November 2020

20201217_Fig-1_E.png

Features

Realize high gain and low NF in each band of GNSS system
 The NJG1187KG1 is available to tune for the corresponding frequency by changing only value of external parts and realize high gain of over 30dB, low NF of about 0.6dB in each band of 1.1 to 1.5GHz.
It supports Multi-GNSS required for high-precision positioning and contributes to improving the receiver sensitivity of GNSS receiver and shortening the positioning time.

Improve circuit design flexibility
 Since the first and second stage LNA of the NJG1187KG1 are matched outside the package, it is available to place a filter between the two LNA stages (Figure 2). Compared with a front filter in the first stage of the NJG1187, it can restrain degradation of NF.
 You can flexibly change the circuit configuration according to the required characteristics.

20201217_Fig-2.png

※ Please visit this page for details of the product

Characteristics

Part Number NJG1187
Supply Voltage 3.3 V typ. (1.5 to 3.7 V)
Current Consumption 8 mA typ. @ 3.3 V
Gain 34 dB typ. @ L1 band
37 dB typ. @ L2/5 band
36 dB typ. @ L6 band
Noise Figure 0.60 dB typ. @ L1 band
0.65 dB typ. @ L2/5/6 band
Output power at 1dB compression point
P-1dB(OUT)
+13 dBm typ. @ L1 band
+12 dBm typ. @ L2/5/6 band
Input Return Loss 11 dB typ. @ L1 band
15 dB typ. @ L2/5 band
14 dB typ. @ L6 band
Output Return Loss 13 dB typ. @ L1 band
15 dB typ. @ L2/5/6 band
Small Package 20201217_NJG1187.jpgDFN6-G1(ESON6-G1)
1.6 mm x 1.6 mm x 0.397 mm typ.

Applications

  • GNSS (including GPS, GLONASS, BeiDou, Galileo) Receiver
  • Car antenna, Dashcam, Car navigation system
  • GNSS module

These contents of a release are the information as of an announcement date. Please contact us about the latest information.