News Release
RIOT-001: Environment Sensing Board Facilitates Researching and Developing New IoT Devices with High Energy Efficiency
January 23, 2020
Ricoh Electronic Devices Co., Ltd.
Ricoh Electronic Devices Co., Ltd. has launched the RIOT-001, an environment sensing board usable in demonstration experiments of IoT devices.
The RIOT-001 is an environment sensing board which monitors ambient temperature, humidity, air pressure, and brightness. The information the RIOT-001 transmits with its Bluetooth Low Energy (BLE) once per five seconds can be displayed on smartphones or tablets where an application programmed for the RIOT-001 is installed.
The RIOT-001 contains our ultra-low supply current and low noise power management ICs and achieves independent power generation, prolongation of battery operating time, and high accuracy, which IoT edge devices require. The new sensing board can make it easy to develop new IoT edge devices and contributes to shortening the construction period of those devices.
RIOT-001
Features
Charging from Solar Battery to Secondary Battery
The R1800, a buck DC/DC converter for energy harvesting, extracts electric power from a solar battery. The converter has a maximum power point control function to configure a voltage at which the solar battery can produce its maximum power, and therefore optimizes the amount of power generation of the solar battery. In addition, a reverse current protection prevents charging loss. These multiple functions in the R1800 enables the RIOT-001 to derive electric power from a solar battery with high efficiency.
High-efficiency Operation
The RP604, a buck-boost DC/DC converter with ultra-low supply current, supplies electricity for an MCU, BLE, and sensors, which contributes to achieving a high-efficiency operation at both standby and active modes. The wide operating voltage from 1.8 V to 5.5 V also enables the board to make efficient use of the secondary battery power.
The RP604 is highly popular for its easy-to-use design featuring ultra-low supply current, high efficiency, and stable output voltage regardless of input fluctuations. It was given the electronic component award by Nikkan Kogyo Shimbun and MONOZUKURI Nippon Conference in 2019.
Battery Monitoring with Low Power Consumption
One of the conventional ways of monitoring secondary battery voltage is to input divided voltage to the ADC of an MCU by using resistor dividers. However, this circuit structure enlarges supply current of the board. Instead, by using the RP124, an LDO regulator including a battery monitor, a low supply current battery voltage monitoring function can be constructed with ease.
Maintenance-free Operation
As the secondary battery, the board is equipped with the SLB series (SLB03070LR35) manufactured by Nichicon Corporation. When fully charged, the secondary battery can continue to operate for approximately 20 hours (A theoretical value).
Nichicon Corporation: SLB Series of Small Li-Ion Rechargeable Batteries https://www.nichicon.co.jp/english/products/slb/
The RIOT-C01, a coin battery board for the RIOT-001, is also released.
The RIOT-C01 is a coin battery board designed for RIOT-001. By using a CR2032-type battery, the RIOT-001 can continue its sensing operation for 1 year and a half (a theoretical value).
Before using the RIOT-001, the secondary battery on it must be charged because the battery is not charged at all when you get the board. The RIOT-C01 can omit the time to wait for the battery to be charged and therefore let you use the RIOT-001 as soon as you get it. It is easy to connect the two boards thanks to a pair of connectors mounted on them.
Features of Power Management ICs on RIOT-001
We provide IoT systems with semiconductor devices that feature low supply current, low noise, and small size by our CMOS analog technology, and thereby strengthens your competitive edge.