NJW4372

Pulse Input Stepper Motor Driver

Data Sheet

Features

  • Logic Supply Voltage (VDD=2.7V to 5.5V)
  • Motor Supply Voltage (VMM=9V to 36V)
  • Output Current (Io=500mA typ.)
  • Low ON Resistance Output (RO(H+L) = 0.8Ω typ.)
  • Low Quiescent Current (IDD=0.75mA typ. / IMM=1.65mA typ.)
  • STEP&DIR (pulse train) Input Control
  • TTL Compatible Input
  • Constant Current Control
  • Maximum Current Select (Torque Select) Function
  • Step Mode (Full / Half step) Select, ENABLE, RESET Function
  • BRAKE (High side outputs turn on) Function
  • MO, ALARM Output Function
  • Protection Circuit (OCP, UVLO, TSD)
  • BCD Technology
  • Package (SSOP32)

General Description

The NJW4372 is a high efficiency bipolar drive stepper motor driver IC, which controls steps and direction by simple input pulse train. DMOS H bridge outputs realize high efficiency, low heat motor application. The control circuit is optimized for logic power supplies and interfaces. Therefore it corresponds to plural kind of logic voltages such as 5.0V and 3.3V. The NJW4372 has PWM constant current circuits, a Torque Select function, an Enable function and a Brake function. These easy and convenient functions make NJW4372 suitable for various applications.

Package Information

Part Number Package Outline PLP Pins Terminal Finish Weight(mg) (Reference) Reflow soldering Flow soldering Iron soldering Packing Condition MSL Solder Foot Print
NJW4372V SSOP32 - 32 Sn2Bi 185 Yes - Yes Dry pack 1 2a

Sample & Buy

Part Number Packages Status Packing Specification Sample Buy
NJW4372V SSOP32 (Active) Contact Us Stock Check