NJU9101 Series
Low Power Analog Front End
NJU9101 Series
Low Power Analog Front End
- Download Datasheet
- ECAD Model: Learn more
-
拡大
:q

Description
The NJU9101 is a Low Power Analog Front End IC for use in micro-power sensing applications, especially electrochemical sensors. It provides a complete signal processing solution between sensor and micro-processor as smart-sensor module. NJU9101 has 2 channel low power operational amplifiers. These amplifiers provide potentiostat and trans-impedance-amplifiers to constitute gas sensor systems. The NJU9101 has calibration circuit by using output data of built-in high precision ADC. It is suitable for temperature variation of sensor. NJU9101 operates over voltage range of 2.4V to 3.6V. Total average current consumption can be less than 5µA.
Applications
- Gas Monitor
- Blood Glucose Meter
- Current Sensing Systems
- Low Power Systems
- Photodiode Sensing Systems
- Portable equipment
Spec
Standard | |
---|---|
Supply Voltage | 2.4V to 3.6V |
Operating Current | (Op-Amp) Typ.4uA (ADC) Typ. 150uA |
Resolution | 16 |
Speed | 32 to 2k |
Number of Pin | 24 |
Interface | I2C |
Structure | CMOS Technology |
Wide Operating Temperature | -40℃ to +85℃ |
Junction Temp. | +150℃ |
Package | EQFN24-LE |
Low Noise Amplifier | 1.3µVpp typ. (0.1 to 10Hz) |
Low Offset Voltage Amplifier | 300µV max. |
Programmable Cell Bias Voltage | OPA: 0.3V to 1.7V (7 steps) OPB: 0.25V to 1.75V (50mV step) |
Programmable Gain Pre-Amplifier | 1V/V to 8V/V |
High resolution Programmable Gain ADC | 1V/V to 8V/V, 16-Bit (NFB), 32sps to 2k sps |
Note | RF immunity Amplifier System Calibration for offset & gain drift Control external EEPROM as a Master device |
Technical Documents
-
New Product Information
Quality & Packages
- Refer to the datasheets for the details on the product.
- The package file or the datasheet includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and recommended land pattern.
Buy / Contact
NJU9101 Series