• X(Twitter)
  • Youtube
  • Linkedin
  • Newsletter
Press Release
Nov. 17, 2026

NL9000 1000 V High-Voltage Monitor IC Improves xEV Energy Efficiency

Delivers high-accuracy voltage sensing in a single package while reducing component count by up to 90%

Nisshinbo Micro Devices Inc. announces the launch of the NL9000, a 1000 V high voltage monitor IC.

NL9000 Product Photo

NL9000(PMAP11-GP)

As the xEV market continues to move toward higher-voltage architectures to extend driving range and shorten charging times, voltage sensing circuits are required to deliver higher accuracy, smaller size, and simpler design. Conventional discrete component implementations have faced challenges in achieving both accuracy voltage measurement over temperature and time and reductions in board space and component count.

The NL9000 integrates a high-voltage sensing circuit that previously required multiple discrete components into a single package. It achieves attenuation-ratio accuracy of ±0.7% across the full operating temperature range, enabling highly accurate high-voltage measurement. In addition, the solution reduces the number of components by approximately 90% and PCB area by approximately 80%. These reductions, together with improved accuracy, system miniaturization, and simplified design, help enhance xEV performance and improve development efficiency.

Leveraging our proprietary semiconductor process technology, the device supports wide common-mode and differential voltage ranges. This increases system design flexibility, contributes to smaller and lighter systems, and enhances xEV efficiency, reliability, and safety.

  • Maximum Input Voltage Rating ±1000 V (continuous)
  • Absolute Maximum Rating ±1400 V
  • Isolation Withstand Voltage AC 2500 Vrms (1 min)
  • Attenuation Accuracy ±0.7% (Ta = −40 to +125ºC)
  • Output Voltage Range 5 V to 0 V (V+=5 V)
  • High Input Resistance 36 MΩ typ., 31 MΩ min.
  • Operating Temperature Range −40 to +125ºC
Product Name NL9000GP
(PMAP11-GP)
Reference Unit Price for 1,000-piece Orders (tax included)* JPY 440
Sample Order Start Date November 17, 2026
Monthly Production Capability 200,000 pcs
  • *The price is based on the consumption tax rate as of November 2026

These features make the NL9000 an ideal solution for e-Axle systems, inverter units, and battery management systems (BMS), enabling accurate high-voltage measurement and reliable feedback control for motor drive and other power electronics applications.

Features

1. Reducing Mounting Area, Component Count, and Design Effort by Integrating High-Value, High-Accuracy Input Resistors

Leveraging our proprietary technology, the NL9000 integrates high-value, high-accuracy input resistors that convert high voltages into levels suitable for microcontroller (MCU) inputs. This integration significantly reduces the need for external components, cutting component count by approximately 90% and PCB area by approximately 80%. In addition, the smaller and simpler circuit configuration contributes to more compact and lightweight system designs while reducing overall design effort.

Example of PCB Mounting of High Voltage Monitor Circuit

Example of PCB Mounting of High Voltage Monitor Circuit

2. High Accuracy Without Resistor Matching

The integrated input resistors achieve attenuation accuracy of ±0.7% across the full operating temperature range without the need for resistor matching. Compared with discrete resistor implementations, they are less susceptible to temperature-induced variation and long-term drift, enabling highly accurate voltage sensing over an extended service life. By providing precise high-voltage detection and feedback for applications such as inverter and boost-converter control, the NL9000 contributes to higher system efficiency.

Ageing Variations

3. Simplified System Design

By integrating the input resistors on-chip, the need for resistor selection, resistor matching, and accuracy adjustment, which have traditionally been design burdens, is eliminated. This can significantly reduce both design and evaluation efforts.

Simplified System Design

Key Specifications (Please refer to the datasheet for details.)

Item NL9000
Maximum Input Voltage Ratings ±1000 V (Continuous)
Absolute Maximum Rating ±1400 V
Attenuation Accuracy ±0.7% (Ta = −40 to +125°C)
Attenuation Ratio (ATT) A ver: 1/100 [V/V]
B ver: 1/200 [V/V]
C ver: 1/140 [V/V]
D ver: 1/160 [V/V]
Output Voltage Range Vo = 5 V to 0 V at V+ = 5 V
High Input Resistance 36 MΩ (typ.) / 31 MΩ (min.)
Operating Temperature Ta = −40 to +125°C
AEC-Q100 Grade 1
Package PMAP11-GP*
8.1×8.1×1.80 mm
*Creepage distance: 5 mm min. (Insulation Material Group 1, CTI ≥ 600 V)
*Flammability rating: UL 94 V-0

Applications

  • e-Axle
  • PCU/Inverters
  • Battery Management Systems (BMS)
  • On-Board Charger (OBC)

Contact