NJU6495

Quad Pin Electronics Driver

Data Sheet

Features

  • Max. 15V Output Range
  • Max. 50MHz Operation
  • Low Leak Current (Max.2nA When Ta=25°C)
  • DC Output Current (Max.125mA)
  • Package Outline (LQFP64-H2 (PKG size 12x12mm, 0.5mmpitch, θja=50°C/W on FR-4 4layer board))
  • CMOS Process

General Description

The NJU6495 is a quad pin driver fabricated in a wide voltage CMOS process. It is designed specifically for Test During Burn In (TDBI) applications, flash memory testers, where cost, functional density, and power are all at a premium.The NJU6495 incorporates four channels of programmable drivers into a small 64 lead LQFP package. Each channel has independent driver levels, data, and high impedance control.This device has a 15V output range, can operate 50MHz signal and features very low leakage in HiZ mode. Those features enable to interface directly with TTL, ECL, CMOS(3V, 5V and 7V), LVCMOS, and custom level circuitry, as well as high voltage levels required for many special test modes in Flash Devices and for stressing devices under test.

Applications

  • Burn In ATE
  • Low Cost ATE
  • Instrumentation

Package Information

Part Number Package Outline PLP Pins Terminal Finish Weight(mg) (Reference) Reflow soldering Flow soldering Iron soldering Packing Condition MSL Solder Foot Print
NJU6495FH2 LQFP64-H2 - 64 Sn2Bi 360 Yes - Yes Dry pack 1 2a

Sample & Buy

Part Number Packages Status Packing Specification Sample Buy
NJU6495FH2 LQFP64-H2 (Active) Contact Us Stock Check