Application Block for i.MX6
A high performance SoC is applied to industrial applications like handy terminals, POS terminals and panel computers. Nisshinbo Micro Devices has one-chip solutions: PMU (Power Management Unit) for NXP Semiconductors i.MX6 which is a popular SoC in the market.
In our PMU line-up, the RN5T568 supports almost all the power sources which the i.MX6 SoC series requires.
The RN5T568 contains 4 step-down DC/DC converters, 7 LDO regulators, 4 reset ICs, a power control circuit, I2C bass interface, GPIO and thermal shutdown. Meeting the requirements of the SoC by a single chip, the RN5T568 is useful to reduce the development time and cost of applications and mounting area. In addition, high efficiency DC/DC converters and low noise LDO regulators can reduce supply current and enhance accuracy of the system.
In the case power source is DC 24 V or DC 12 V, please use a step-down DC/DC converter whose MAX input voltage is 30 V or 34 V together.
i.MX6 Solo / Dual Lite
i.MX6 Solo / Dual
|R1245||1.2A 30V Input PWM Step-down DC/DC Converter|
|R1243||2A 30V Input PWM Step-down DC/DC Converter|
|R1242||3A 30V Input PWM Step-down DC/DC Converter with Synchronous Rectifier Ext. Low-side Tr.|
|R1270||3A 34V Input PWM/VFM Step-down DC/DC Converter with PLL Synchronization|
|RN5T568||Power Management System Device|
|NJW4118T1||±2.0A DDR Termination Regulator|