R5114 系列
低消费电流42V输入,带看门狗定时器的系统电源

  • 概述

    The R5114 is a system power supply IC with an ultra-low power watchdog timer (LDO + VD + WDT) that has an input voltage range of 3.5 V to 42 V.

    The R5114 offers a low current consumption of 8.5 µA at operation and 0.2 µA at standby. When ECU goes into sleep, the device automatically turns the built-in WDT off to prevent it from sending a reset signal. When ECU goes back to active, the device automatically turns the built-in WDT on to resume the ECU monitoring.

    The R5114 is also available with the version that is not equipped with an auto monitoring stop.

  • 规格
    消费 工业 车载
    输入电压范围 3.5 V to 42.0 V (50.0 V)
    工作温度范围 -40°C to 105°C (125°C) -40°C to 125°C (150°C) -40°C to 125°C (150°C)
    电源电流 Typ. 8.5 µA
    待机电流 Typ. 0.2 µA
    脉冲忽略时间 Typ. 18 ms (CTW = 10 nF)
    超时时间 Typ. 18 ms (CTW = 10 nF)
    超时时间精度 -17.8% to 21.7%
    重置信号时间 Typ. 9 ms (CTW = 10 nF)
    封装 HSOP-8E, HSOP-18, HQFN0808-28
    VD检测器阈值范围 2.5 V to 4.8 V
    VD检测器阈值精度 ±1.6%
    VD释放输出延迟时间 Typ. 220 ms (CD = 0.22 µF)
    LDO输出电压范围 3.3 V to 5.0 V
    LDO输出电压精度 ±1.6%
    LDO短路电流限制 Typ. 95 mA
    LDO输出电流限制 Typ. 440 mA
    LDO热关断 Typ. 170°C
  • 技术资料
    • R5114Sxx2C Typical Application

      R5114Sxx2C Typical Application

      CIN = Ceramic 0.1 µF, COUT = Ceramic 0.1 µF

    • R5114Sxx2C (Timeout type) Timing Chart

      R5114Sxx2C (Timeout type) Timing Chart

      * tRESET : Release Delay Time
      * tIGN : Ignoring Time
      * tWD : Monitoring Time
      * tWR : Reset Time

  • 品质&封装
    • 有关产品的详细信息,请参见数据表。
    • 封装文件包括封装尺寸,卷带规格,卷带盘尺寸,功耗和建议的焊盘图案。
    • 请联系我们或我们的代理商以获取未发布的可靠性信息。

下载数据表

功能说明

用以下条件检索类似商品

分类:看门狗定时器

特性 +VD,+LDO
输入电压
min (V)
3.5
输入电压
max (V)
42.0
消耗电流
(µA)
8.5