R5550 系列
智能电源开关IC
- 下载数据表
- ECAD 模型: 了解详情
-

概述
The R5550 Series are CMOS-based intelligent power switch IC. R5550 is a protection IC used in power line with built-in current limit circuit and under-voltage lockout circuit (UVLO). Due to a built-in 180mΩ on-resistor, R5550 can provide a low supply current. R5550 can detect two different over current threshold and under voltage error. When the R5550 detects over current, the switch turns off after the preset delay time (10ms). If the output current exceeds the larger current limit, the current is limited by the preset value immediately, and the switch turns off after the preset delay time (1.33ms). R5550 has VSENSE pin. If an abnormal low voltage is detected, after the preset delay time (10ms), the switch turns off. After detecting the abnormal situation, the switch turns on automatically if the cause of the error is removed. A 1mm square DFN(PL)1010-4F package called a flip chip is available.
规格
消费 | |
---|---|
输入电压范围 | 2.3 V to 5.25 V (6.0 V) |
工作温度范围 | -40°C to 85°C (125°C) |
电源电流 | Typ. 2.6 µA (Enable, VSENSE = 2.0 V) |
输出电流 | 1 A |
导通电阻 | 180 mΩ (VIN = 3.3 V, IOUT = 100 mA) |
内置FET | Pch |
封装 | DFN(PL)1010-4F |
SENSE Pin Detector Threshold | Typ. 0.5 V |
SENSE Pin Detector Threshold Accuracy | ±3% |
保护回路/功能
TSD | Reverse | OCP | UVLO | OVLO | Soft Start | PGOOD | Auto Discharge | Reset |
---|---|---|---|---|---|---|---|---|
功能说明
TSD | Thermal Shutdown Function |
---|---|
Reverse Current Protection | Reverse Current Protection |
OCP | Overcurrent Protection |
UVLO | Undervoltage Lockout Protection |
OVLO | Overvoltage Lockout Protection |
Soft Start | Soft Start Function |
PGOOD | Power Good Output |
Auto Discharge | Auto Discharge Circuit |
技术资料
-
Typical Application
-
Output Voltage vs. Output Current
-
Timing Chart Current Limit Detection
-
Timing Chart Low Voltage Detection
-
Timing Chart Over Current Detection
品质&封装
产品名称 | 对应 | 封装 | 标注 | 信赖性 |
---|---|---|---|---|
R5550K001A-TR |
|
DFN(PL)1010-4F | R5550K | R5550K |
- 有关产品的详细信息,请参见数据表。
- 封装文件或数据表包括封装尺寸,卷带规格,卷带盘尺寸,功耗和建议的焊盘图案。