RV5C387A 系列


  • 概述

    The RV5C387A is a CMOS real-time clock IC connected to the CPU by two signal, SCL and SDA, and configured to perform serial transmission of time and calendar data to the CPU. The periodic interrupt circuit is configured to generate interrupt signals with six selectable interrupts ranging from 0.5 seconds to 1 month. The 2 alarm circuits generate interrupt signals at preset times. The oscillation circuit is driven under constant voltage so that fluctuations in oscillation frequency due to voltage are small and supply current is also small (TYP. 0.35μA for the RV5C387A at 3 volts). The oscillation halt sensing circuit can be used to judge the validity of internal data in such events as power-on. The supply voltage monitoring circuit is configured to record a drop in supply voltage below two selectable supply voltage monitoring threshold settings. The 32-kHz clock output function (Nch. open drain) is intended to output sub-clock pulses for the external microcomputer. The oscillation adjustment circuit is intended to adjust time counts with high precision by correcting deviations in the oscillation frequency of the crystal oscillator. The 32-kHz clock circuit can be disabled by certain register settings. This model comes in a 10-pin SSOP-G.

  • 规格
    计时电源电压范围 1.45 V to 5.50 V
    电源电流 0.35 µA (VDD = 3 V)
    连接到CPU Two Signal Lines (SCL,SDA), I2C Bus Interface, Maximum Clock Frequency: 400 kHz (VDD = 3 V)
    时钟输出 32.768 kHz (Nch Open Drain Output Controllable by Command)
    封装 SSOP10G


    ECO Clock Adjust OSC Halt Sensing Supply Voltage Monitoring Circuit Automatic Identification of Leap Years Selectable 12-hour and 24-hour Backup Switch
  • 技术资料
  • 品质&封装
    • 有关产品的详细信息,请参见数据表。
    • 封装文件或数据表包括封装尺寸,卷带规格,卷带盘尺寸,功耗和建议的焊盘图案。



ECO ECO Function
Clock Adjust Clock Adjust Function
OSC Halt Sensing OSC Halt Sensing Function
Supply Voltage Monitoring Circuit Supply Voltage Monitoring Function
Automatic Identification of Leap Years Automatic Identification of Leap Years
Selectable 12-hour and 24-hour Selectable 12-hour and 24-hour
Built-in VD with Delay Time Built-in VD with Delay Time



接口 2-wire
min (V)
max (V)