R5436 系列
	三节至五节锂电池保护芯片(带温度保护功能)
		
	
	R5436 系列
	三节至五节锂电池保护芯片(带温度保护功能)
		- 下载数据表
- ECAD 模型: 了解详情
- 
		
				
拡大
        :q
                                 
                        
         
                        概述
R5436是可充电锂离子/锂聚合物电池用的过充、过放以及过电流保护IC。可检出3-5节锂电池的过充、过放以及放电过流、充电过流。 R5436具有电池平衡功能,以解决串联电池的不平衡状态。通过级联可用于6节以上的充电电池。 R5436可选功能中有断线检测功能,可检出电池与保护板的断线。
规格
| 输入电压 | 2.5 V to 25 V (Maximum Rating: 30 V) | ||
| 充电器负输入电压 | 30 V (Maximum Rating) | ||
| 元件数 | 3,4,5 | ||
| 电源电流 | Typ. 12.0 µA | ||
| 待机电流 | Typ. 6.0 µA | ||
| 过充电检测电压 | 3.6 V to 4.5 V (0.005 V Steps) | ||
| 过充电检测电压精度 | ±25 mV | ||
| 过充电检测延迟时间 | 1.0 s | ||
| 过充电恢复电压 | VDET1 -0.1 V to VDET1 -0.4 V (0.01 V Steps) | ||
| 过放电检测电压 | 2.0 V to 3.2 V (0.005 V Steps) | ||
| 过放电检测电压精度 | ±2.5% | ||
| 过放电检测延迟时间 | Adjustable with an external capacitor | ||
| 放电过电流检测电压 | VDET31: 0.05 V to 0.25 V (0.01 V Steps) VDET32: VDET31 x 3 | ||
| 放电过电流检测电压精度 | VDET31: ±15 mV (VDET31 ≤ 0.15V) / ±20 mV (VDET31 > 0.15V) VDET32: ±25 mV (VDET31 ≤ 0.10V) / ±50 mV (VDET31 > 0.10V) | ||
| 放电过电流检测延迟时间 | Adjustable with an external capacitor | ||
| 充电过电流检测电压 | -0.2 V, -0.1 V, -0.05 V | ||
| 充电过电流检测电压精度 | ±15 mV (VDET4= -0.05V / -0.1V) / ±30 mV (VDET4 = -0.2V) | ||
| 充电过电流检测延迟时间 | 8 ms | ||
| 短路检测电压 | 0.25 V to 1.0 V (0.02 V Steps) | ||
| 检测延迟时间短 | 300 µs | ||
| 恢复过充的条件 | Voltage Release | ||
| 恢复过放电的条件 | Latch / Voltage Release | ||
| 封装 | TSSOP-28 | ||
| Cell Balancing Detection Voltage (VCBD) | 3.45 V to 4.45 V (0.005 V Steps) | ||
| Cell Balancing Release Voltage | VCBD to VCBD -0.4 V (0.01 V Steps) | ||
| 0 V Charge | Available | ||
- 1 VDET31: Set to meet the following equation: (3×VDET31+0.05<0.8×VSHORT). 2 VDET32 is not detected when VDET32 is higher than VSHORT.
保护回路/功能
| Temperature Protection | Reset | Alarm | Cell Balance | Cascadable | Open Wire Detection | Wakeup | Short-circuit Current Detection | Delay Time Shortening | 
|---|---|---|---|---|---|---|---|---|
功能说明
| Temperature Protection | Temperature Protection | 
|---|---|
| Reset | Reset Function | 
| Alarm | Alarm Function | 
| Cell Balance | Cell Balance Function | 
| Cascadable | Cascade Connect Function | 
| Open Wire Detection | Open Wire Detect Function | 
| Wakeup | Wakeup Function | 
| Short-circuit Current Detection | Short-circuit Current Protection | 
| Delay Time Shorting | Output Delay Time Short Function | 
有关详细信息,请参阅 "关于外部保护功能以及它们的优点"。
技术资料
- 
      应用信息: 有电池平衡功能、5节电池保护电路例  
品质&封装
- 有关产品的详细信息,请参见数据表。
- 封装文件或数据表包括封装尺寸,卷带规格,卷带盘尺寸,功耗和建议的焊盘图案。
购买 / 联系我们
- 
            技术支持
 
  
     
   

